Switzerland
Description
- Improved braking performance due to improved block stiffness, with 3D blades optimized for shoulder and middle blocks.
- Improved traction performance and grip on snow/ice thanks to micro-edge block shape.
- Improved lateral grip on snow due to half Z-groove in the middle.
- Improved performance on snow and wet roads due to increased stiffness in the centre block and the Z-shaped lamella in the centre.
- Reinforced water drainage in rain / snow due to round and V-shaped lateral grooves.
Product Safety Information
Manufacturer
Contact
Manufacturer information
Important information
NEXEN TIRE All-round Protection Warranty
Only valid when purchasing four NEXEN tyres from the following product portfolio: N’Fera Sport, N’Fera Primus, N’Fera RU1, N’Blue HD Plus, Winguard Sport2 + SUV, Winguard Snow’G3, Winguard Snow’G WH2, N’Blue 4SeasonIt is guaranteed that NEXEN TIRE replaces the damaged tyres in case of:
- Impact damage
- Stab injuries
- Vandalism
- Theft
Excluded are damages due to:
- Overload or damages that can be traced back to a wrong tyre pressure.
- “Burnouts” (intentional wheels spinning) and “drifts” as well as all kinds of damages caused by a race on public and non-public streets.
- Inappropriate fitting, balancing and mounting of the tyre.
- Inappropriate storage and transport of the tyres incl. damages caused by weather conditions.
- Mechanically induced misalignment of the wheels or axles leading to increased or uneven tyre abrasion (wear).
- Fire
Download NEXEN warranty flyer
Register online here: https://nexentire-garantie.de/
Please note: the warranty is only valid for consumers and dealers in Germany.
EU Tyre Label
The Tyre Labelling Regulation determines the information that must be provided with regard to tyres' fuel efficiency, wet grip and external rolling noise. Information is also provided on the product's performance in wintery driving conditions.
Regulation EU 1222/2009, which has been in force since 01/11/2012, has been revised and will be replaced from 1 May 2021 by Regulation EU 2020/740, from which point new standards will apply. The assessment categories for fuel efficiency, wet grip and external noise have been changed and the layout of the EU label has been changed accordingly. The manufacturers' product data sheets, stored in the EU database, can be downloaded via a QR code integrated into the label. It also includes information on snow grip and ice grip for tyres that meet these criteria.
The following tyres are exempt from the regulation:
- Tyres designed to be fitted only to vehicles registered for the first time before 1 October 1990
- Remoulded tyres (until Regulation EU 2020/740 has been widened accordingly)
- Professional off-road tyres
- Racing tyres
- Tyres with additional devices to improve traction, e.g. studded tyres
- Temporary-use spare tyres (T-type tyres)
- Tyres with a speed rating below 80 km/h
- Tyres with a nominal rim diameter of 254 mm or less and 635 mm or more
Nexen
15025NXK
175/60 R15 81H
C
Overview of criteria and valuation classes
Fuel efficiency
Fuel consumption is dependent upon the rolling resistance of the tyres, the vehicle itself, driving conditions and driving style. The measured rolling resistance (rolling resistance coefficient) of the tyre is categorised in classes A (most efficient) to E (least efficient).
Fitting a vehicle with class A tyres all round can lead to a reduction in fuel consumption of up to 7.5%* in comparison to the same vehicle with class E tyres all round. Commercial vehicles may have even greater reductions.
(Source: Impact analysis of the European Commission
* if measured in accordance with the stated procedures in EU Regulation 2020/7400)
Please note:
Fuel consumption depends to a great extent on the individual driving style and can be reduced considerably by driving in an environmentally friendly manner. To improve fuel efficiency, tyre pressures must be checked regularly.
Wet grip
Wet grip is categorised in classes A (shortest braking distance - E (longest braking distance).
A car fitted with class A tyres can have a braking distance which is 18 m shorter than that of a car fitted with class E tyres when performing an emergency stop at 80 km/h (in average road grip conditions). *
*Source: wdk Wirtschaftsverband der deutschen Kautschukindustrie e.V. (Professional association of the German rubber industry)
Please note:
Road safety is highly dependent upon individual driving style. Stopping distances must always be observed. To improve road grip in wet conditions, tyre pressure must be checked regularly.
External rolling noise
The noise emission of a tyre has an effect upon the total noise of the vehicle and influences not only driving comfort, but also environmental noise pollution. The EU tyre label categorises extrnal rolling noise in the classes from A (quietest rolling noise level) to C (loudest rolling noise level). This is measured in decibels (dB) and compared to the European noise emission limit values for external tyre rolling noise.
A
The pictogram with the classification "A" shows that the external rolling noise of the tyre falls below the 2016 EU limit value by more than 3 dB.
B
Classification "B" means that the external rolling noise of the tyre falls below the 2016 EU limit value by up to 3 dB.
C
Classification "C" means that the specified limit value has been exceeded.
Grip in snow, winter-suitability
Tyres labelled with the 3 Peak Mountain Snow Flake, or "3PMSF" symbol, must display a specified braking or traction characteristic on a solid bed of snow in comparison to a standardised reference comparison tyre (a so-called "SRTT" - standard reference test tyre).
Please note:
For all winter and all-year tyres manufactured from 1/1/2018, the Alpine symbol is mandatory. Tyres labelled as such are tested for their snow characteristics in a standardised and globally recognised test procedure and must fulfil specified minimum requirements. These tyres provide particularly good performance with regard to safety and driving control in winter conditions - snow, icy roads and low temperatures.
