Switzerland
Pirelli Pzero E Run Flat 235/40 R19 96W
Technical specifications
Description
Specifically designed for high-end and electrified vehicles, P ZERO™ E combines Pirelli’s top class eco-safety performances leveraging on our most advanced technologies. It delivers optimal braking performance, outstanding comfort, and ultralow energy consumption, being rated “A-A-A” on EU label(1). The new RunForward™ technology lets you continue driving in the event of a puncture up to 40km at a reduced speed(2). It combines excellent performances and durability with more than 55% bio-based and recycled materials(3), marking another step towards a reduced environmental impact(4).
Legal notes:
(1) All 17 sizes available at product launch have been rated triple A class on EU label (A class in efficiency, A class in wet braking, A class in external noise).
(2) All 17 sizes available at product launch include RunForward™ technology, that enables driving up to 40km at up to 80km/h in case of a flat tyre. Source: Pirelli R&D internal tests.
(3) All 17 sizes available at product launch. Thanks to a combination of physical segregation and mass balance approach. Depending on tyre size, bio-based and recycled content ranges between 29-31% and 25-27% respectively. Bio-based materials are natural rubber, textile reinforcements, bio-chemicals, bio-resins and lignin, while recycled materials are metallic reinforcements, chemicals and - through mass balance - synthetic rubber, silica and carbon black.
(4) vs. Traditional UHP tyre P Zero™ (PZ4 size 235/45R18), normalized by mileage, according to ISO 14026 and verified by Bureau Veritas.
Manufacturer information
EU Tyre Label
The Tyre Labelling Regulation determines the information that must be provided with regard to tyres' fuel efficiency, wet grip and external rolling noise. Information is also provided on the product's performance in wintery driving conditions.
Regulation EU 1222/2009, which has been in force since 01/11/2012, has been revised and will be replaced from 1 May 2021 by Regulation EU 2020/740, from which point new standards will apply. The assessment categories for fuel efficiency, wet grip and external noise have been changed and the layout of the EU label has been changed accordingly. The manufacturers' product data sheets, stored in the EU database, can be downloaded via a QR code integrated into the label. It also includes information on snow grip and ice grip for tyres that meet these criteria.
The following tyres are exempt from the regulation:
- Tyres designed to be fitted only to vehicles registered for the first time before 1 October 1990
- Remoulded tyres (until Regulation EU 2020/740 has been widened accordingly)
- Professional off-road tyres
- Racing tyres
- Tyres with additional devices to improve traction, e.g. studded tyres
- Temporary-use spare tyres (T-type tyres)
- Tyres with a speed rating below 80 km/h
- Tyres with a nominal rim diameter of 254 mm or less and 635 mm or more
Pirelli
4286900
235/40 R19 96W
C
Overview of criteria and valuation classes
Fuel efficiency
Fuel consumption is dependent upon the rolling resistance of the tyres, the vehicle itself, driving conditions and driving style. The measured rolling resistance (rolling resistance coefficient) of the tyre is categorised in classes A (most efficient) to E (least efficient).
Fitting a vehicle with class A tyres all round can lead to a reduction in fuel consumption of up to 7.5%* in comparison to the same vehicle with class E tyres all round. Commercial vehicles may have even greater reductions.
(Source: Impact analysis of the European Commission
* if measured in accordance with the stated procedures in EU Regulation 2020/7400)
Please note:
Fuel consumption depends to a great extent on the individual driving style and can be reduced considerably by driving in an environmentally friendly manner. To improve fuel efficiency, tyre pressures must be checked regularly.
Wet grip
Wet grip is categorised in classes A (shortest braking distance - E (longest braking distance).
A car fitted with class A tyres can have a braking distance which is 18 m shorter than that of a car fitted with class E tyres when performing an emergency stop at 80 km/h (in average road grip conditions). *
*Source: wdk Wirtschaftsverband der deutschen Kautschukindustrie e.V. (Professional association of the German rubber industry)
Please note:
Road safety is highly dependent upon individual driving style. Stopping distances must always be observed. To improve road grip in wet conditions, tyre pressure must be checked regularly.
External rolling noise
The noise emission of a tyre has an effect upon the total noise of the vehicle and influences not only driving comfort, but also environmental noise pollution. The EU tyre label categorises extrnal rolling noise in the classes from A (quietest rolling noise level) to C (loudest rolling noise level). This is measured in decibels (dB) and compared to the European noise emission limit values for external tyre rolling noise.
A
The pictogram with the classification "A" shows that the external rolling noise of the tyre falls below the 2016 EU limit value by more than 3 dB.
B
Classification "B" means that the external rolling noise of the tyre falls below the 2016 EU limit value by up to 3 dB.
C
Classification "C" means that the specified limit value has been exceeded.
