Austria
Viking City Tech II 175/65 R14 82T
Technical specifications
Description
The CityTech II is an economical attractive tyre with low rolling resistance and high mileage.The CityTech II is an economical attractive tyre with low rolling resistance and high mileage.
- For compact-class and middle-class vehicles
- Improved protection against aquaplaning
- Excellent handling on dry roads
- Improved protection against aquaplaning
Improved protection against aquaplaning.
The modern tread of the CityTech II effectively channels the water away when it rains. This improves the protection against aquaplaning.
Excellent handling on dry roads.
The tyre is very robust – this results in very good cornering stability on dry roads and optimises the handling performance on corners and when driving in a straight line.
Reduced noise level and improved driving comfort.
Road noise is reduced and the low noise level improves driving comfort.
The modern lateral groove system in the tread grooves means that water is effectively channelled from the contact area in the middle to the large circumferential grooves. This ensures good protection against aquaplaning.
Excellent handling on dry roads.
The outer shoulder is made up of closed shoulder blocks with a solid circumferential groove. This increases the rigidity and results in very good cornering stability on dry roads. The handling performance on corners and when driving in a straight line is optimised.
Reduced noise level and improved driving comfort.
The uniform width and inclination of the shoulder grooves, in combination with the slightly offset inner and outer shoulders, reduces the road noise due to the optimised frequency overlay. The low noise level improves the driving comfort
Product Safety Information
Manufacturer
Manufacturer information
EU Tyre Label
The Tyre Labelling Regulation determines the information that must be provided with regard to tyres' fuel efficiency, wet grip and external rolling noise. Information is also provided on the product's performance in wintery driving conditions.
Regulation EU 1222/2009, which has been in force since 01/11/2012, has been revised and will be replaced from 1 May 2021 by Regulation EU 2020/740, from which point new standards will apply. The assessment categories for fuel efficiency, wet grip and external noise have been changed and the layout of the EU label has been changed accordingly. The manufacturers' product data sheets, stored in the EU database, can be downloaded via a QR code integrated into the label. It also includes information on snow grip and ice grip for tyres that meet these criteria.
The following tyres are exempt from the regulation:
- Tyres designed to be fitted only to vehicles registered for the first time before 1 October 1990
- Remoulded tyres (until Regulation EU 2020/740 has been widened accordingly)
- Professional off-road tyres
- Racing tyres
- Tyres with additional devices to improve traction, e.g. studded tyres
- Temporary-use spare tyres (T-type tyres)
- Tyres with a speed rating below 80 km/h
- Tyres with a nominal rim diameter of 254 mm or less and 635 mm or more
Viking
D-118526
175/65 R14 82T
C
Overview of criteria and valuation classes
Fuel efficiency
Fuel consumption is dependent upon the rolling resistance of the tyres, the vehicle itself, driving conditions and driving style. The measured rolling resistance (rolling resistance coefficient) of the tyre is categorised in classes A (most efficient) to E (least efficient).
Fitting a vehicle with class A tyres all round can lead to a reduction in fuel consumption of up to 7.5%* in comparison to the same vehicle with class E tyres all round. Commercial vehicles may have even greater reductions.
(Source: Impact analysis of the European Commission
* if measured in accordance with the stated procedures in EU Regulation 2020/7400)
Please note:
Fuel consumption depends to a great extent on the individual driving style and can be reduced considerably by driving in an environmentally friendly manner. To improve fuel efficiency, tyre pressures must be checked regularly.
Wet grip
Wet grip is categorised in classes A (shortest braking distance - E (longest braking distance).
A car fitted with class A tyres can have a braking distance which is 18 m shorter than that of a car fitted with class E tyres when performing an emergency stop at 80 km/h (in average road grip conditions). *
*Source: wdk Wirtschaftsverband der deutschen Kautschukindustrie e.V. (Professional association of the German rubber industry)
Please note:
Road safety is highly dependent upon individual driving style. Stopping distances must always be observed. To improve road grip in wet conditions, tyre pressure must be checked regularly.
External rolling noise
The noise emission of a tyre has an effect upon the total noise of the vehicle and influences not only driving comfort, but also environmental noise pollution. The EU tyre label categorises extrnal rolling noise in the classes from A (quietest rolling noise level) to C (loudest rolling noise level). This is measured in decibels (dB) and compared to the European noise emission limit values for external tyre rolling noise.
A
The pictogram with the classification "A" shows that the external rolling noise of the tyre falls below the 2016 EU limit value by more than 3 dB.
B
Classification "B" means that the external rolling noise of the tyre falls below the 2016 EU limit value by up to 3 dB.
C
Classification "C" means that the specified limit value has been exceeded.
