Germany
Description
Ventus S1 evo3 - the tyre that combines performance and sustainability.
Tread compound:
Aqua Pine tread compound contains raw materials such as pine resins and vegetable oils mixed in state-of-the-art facilities. This provides increased tread hardness and stability as well as excellent wet performance.
Use of high-strength steel belt wire:
The high-strength belts absorb external influences efficiently, increasing the durability of the tyre and driving comfort.
Aramid reinforced belt:
The aramid reinforcement counteracts the balloon effect. This means that the tyre contact area remains constant even at high speeds, thus enabling higher cornering speeds.
Double-layer fibre reinforcement:
The double-layer fibre reinforcement of the carcass structurally reinforces the hardness of the tyre.
Folded belt edge:
The reinforcement of the belt has been further increased.
Strong seamless bead cable:
By increasing the bond between the tyre and the wheel, the fit of the tyre is optimally ensured even at high acceleration.
Product Safety Information
Manufacturer
Contact
Manufacturer information
EU Tyre Label
The Tyre Labelling Regulation determines the information that must be provided with regard to tyres' fuel efficiency, wet grip and external rolling noise. Information is also provided on the product's performance in wintery driving conditions.
Regulation EU 1222/2009, which has been in force since 01/11/2012, has been revised and will be replaced from 1 May 2021 by Regulation EU 2020/740, from which point new standards will apply. The assessment categories for fuel efficiency, wet grip and external noise have been changed and the layout of the EU label has been changed accordingly. The manufacturers' product data sheets, stored in the EU database, can be downloaded via a QR code integrated into the label. It also includes information on snow grip and ice grip for tyres that meet these criteria.
The following tyres are exempt from the regulation:
- Tyres designed to be fitted only to vehicles registered for the first time before 1 October 1990
- Remoulded tyres (until Regulation EU 2020/740 has been widened accordingly)
- Professional off-road tyres
- Racing tyres
- Tyres with additional devices to improve traction, e.g. studded tyres
- Temporary-use spare tyres (T-type tyres)
- Tyres with a speed rating below 80 km/h
- Tyres with a nominal rim diameter of 254 mm or less and 635 mm or more
Hankook
1022632
205/45 R17 88W
C
Overview of criteria and valuation classes
Fuel efficiency
Fuel consumption is dependent upon the rolling resistance of the tyres, the vehicle itself, driving conditions and driving style. The measured rolling resistance (rolling resistance coefficient) of the tyre is categorised in classes A (most efficient) to E (least efficient).
Fitting a vehicle with class A tyres all round can lead to a reduction in fuel consumption of up to 7.5%* in comparison to the same vehicle with class E tyres all round. Commercial vehicles may have even greater reductions.
(Source: Impact analysis of the European Commission
* if measured in accordance with the stated procedures in EU Regulation 2020/7400)
Please note:
Fuel consumption depends to a great extent on the individual driving style and can be reduced considerably by driving in an environmentally friendly manner. To improve fuel efficiency, tyre pressures must be checked regularly.
Wet grip
Wet grip is categorised in classes A (shortest braking distance - E (longest braking distance).
A car fitted with class A tyres can have a braking distance which is 18 m shorter than that of a car fitted with class E tyres when performing an emergency stop at 80 km/h (in average road grip conditions). *
*Source: wdk Wirtschaftsverband der deutschen Kautschukindustrie e.V. (Professional association of the German rubber industry)
Please note:
Road safety is highly dependent upon individual driving style. Stopping distances must always be observed. To improve road grip in wet conditions, tyre pressure must be checked regularly.
External rolling noise
The noise emission of a tyre has an effect upon the total noise of the vehicle and influences not only driving comfort, but also environmental noise pollution. The EU tyre label categorises extrnal rolling noise in the classes from A (quietest rolling noise level) to C (loudest rolling noise level). This is measured in decibels (dB) and compared to the European noise emission limit values for external tyre rolling noise.
A
The pictogram with the classification "A" shows that the external rolling noise of the tyre falls below the 2016 EU limit value by more than 3 dB.
B
Classification "B" means that the external rolling noise of the tyre falls below the 2016 EU limit value by up to 3 dB.
C
Classification "C" means that the specified limit value has been exceeded.
Customer reviews (129)
Tyre insurance
more information
For private customers only
more information
Europe-wide protection
One-off contribution
- Accident, e.g. flat tyre
- Vandalism
- Theft
- 100% reimbursement of the costs for tires up to 12 months of age/running time
- 70% reimbursement of costs for tires with an age/running time of 13 to 24 months
- 100% reimbursement of repair costs
- No allowance per tire
- Accident, e.g. flat tyre
- Vandalism
- Theft
- 100% reimbursement of the costs for tires up to 12 months of age/running time
- 70% reimbursement of costs for tires with an age/running time of 13 to 24 months
- 100% reimbursement of repair costs
- 15,- € allowance per tire
- The contribution is paid once in advance and is valid for the selected term
- Europe-wide protection
- Insurance starts when the goods are handed over at a reifen.com branch or on receipt of the policy after online purchase
- Insurance ends with the occurrence of the damage or the end of the contract
Compatible items
